You are here: Home » Products » Motor Drivers » stepper motor drivers » BHD2806 » Holry Stepper Mortor Driver Smooth Operation Minimal Vibration And Noise BHD2806 Laser Marking Machine
Share to:

Holry Stepper Mortor Driver Smooth Operation Minimal Vibration And Noise BHD2806 Laser Marking Machine

The BHD2806 is a new type of stepper driver successfully researched and developed according to the market demand and development trend. It adopts a new 32-bit motor control special DSP chip, which makes the motor run more smoothly and is not easy to lose steps. Application Industry: laser marking machine, wire harness processing equipment, automatic soldering machine, dispensing machine, advertising equipment, and medical devices.

  • BHD2806
  • HOLRY
Color:
Size:
Availability:
Quantity:

Product Description

DRIVERS---BHD2806

The BHD2806 is a new type of stepper driver successfully researched and developed according to the market demand and development trend. It adopts a new 32-bit motor control special DSP chip, which makes the motor run more smoothly and is not easy to lose steps. The BHD2806 receives input signal pulse, direction and enable input. When using the internal position, the pulse and direction interfaces can be used for sensor signal input and accept 485 control operation. The motor's heat generation and vibration amplitude are reduced to a minimum, thus better improving machining speed and accuracy of machine operation. Operating voltage is AC18V-80V/DC25-110V, and is compatible with various types of two-phase stepper motors with currents up to 6.0A and outer diameters from 57 to 86mm.


Technical characteristics

  • Brand new 32-bit DSP chip for motor control;

  • Can drive stepper motors in the 86 series and below;

  • Pulse response frequencies up to 200 Kpps;

  • Opto-isolated signal input;

  • High speed, high torque, high energy efficiency;

  • With overcurrent, over-voltage protection.



Electrical Specifications

Specifications

Minimun value

Typical value

Peak value

Unit

Continuous output current

0

6

8.4

A

Input power voltage

+18v

--

100v

Vac

Pulse frequency

0

--

200

KHZ

Input signal current

7

10

20

MA

insulation resistance

500

--

--


Operating environment and parameters

Cooling method

Natural wind cooling or forced cooling


Ambient environment

Environment

No corrosive gas or dust, etc.

Cannot be used in special environments such as radioactive materials, magnetic fields, and vacuum.

Temperature

0--- +50℃

Humidity

Under 85%(no dew)

Storage temperature

-20℃--80℃

Weight

Around 600 grams

Dimensions

150×53×97.5mm3


Previous: 
Next: