You are here: Home » Products » Motor Drivers » stepper motor drivers » DS535 » Holry Stepper Mortor Driver Smooth Operation Minimal Vibration And Noise DS535 Digital two-phase step drive Medical Devices
Share to:

Holry Stepper Mortor Driver Smooth Operation Minimal Vibration And Noise DS535 Digital two-phase step drive Medical Devices

DS535 is a new digital hybrid step servo drive with serial port debugging function launched by GET Technology Co., Ltd. It adopts the latest 32-bit DSP control technology and integrates MODBUS-RTU standard protocol specifications.

Application Industry: laser marking machine, wire harness processing equipment, automatic soldering machine, dispensing machine, advertising equipment, and medical devices.

  • DS535
  • HOLRY
Color:
Size:
Availability:
Quantity:

Product Description

一、Product profile

1. summary

DS535 is a new digital hybrid step servo drive with serial port debugging function launched by GET Technology Co., Ltd. It adopts the latest 32-bit DSP control technology and integrates MODBUS-RTU standard protocol specifications. Users can set multiple parameters such as 200-40000 through the upper computer debugging software, which greatly enriches the practical functions of the product and can meet the application needs in most occasions.

The DS535 driver adopts the control principle of servo, and integrates vector control technology, built-in differential technology and adaptive filtering technology, which greatly optimizes the performance of the step motor, with low, high speed and stable operation and small noise.Accurate and smooth pure string current vector control technology effectively reduces the motor heating.

The drive voltage of the DS535 drive ranges from D C 20 to 50 V, fitting a two-phase hybrid stepping motor with a peak current below 3.5A and with an external diameter of 28 to 42 m m.

2. characteristic


● with serial port debugging function     ● has a brand new 32-bit DSP technology

● small for easy installation

● can drive 4,6,8 line two-phase stepping motors  

● light isolation differential signal input

● built-in microscopy

● subdivision set range of 200-40,000

● pulse response frequency of up to 200KHz (higher adjustable)

● current can be arbitrarily set up with the between the 0.1-3.5A to greatly

● precision current control  to greatly reduce the motor heating

● low vibration low noise

● static current automatically halved

● has protective functions such as over-pressure, under-pressure and over-current


3. application area

Suitable for a variety of small and medium-sized automation equipment and instruments, such as: engraving machine, marking machine, cutter, plotter, CNC machine tools, automatic assembly equipment, etc.In the user expects small noise, high speed device application effect is particularly good.

II. Electrical, mechanical and environmental indicators

1. Electrical indicators

explain

DS535

least value

representative value

crest value

unit

output

0.4

-

3.5

A

Enter the power voltage

20

36

50

VDC

Control the signal input current

7

10

16

mA

Step-in pulse frequency

0

-

200

KHz

insulation resistance

50



2. Use the environment and the parameters

cooling-down method

Natural cooling, fan heat dissipation

service environment

occasion

Can not be placed next to other heating equipment, to avoid dust, oil fog, corrosive gas, humidity is too large and strong vibration places, prohibit combustible gas and conductive dust

temperature

0——50℃

humidity

40—90%RH

vibrate

10~55Hz/0.15mm

Save the temperature

-20℃~65℃

3. Mechanical installation diagram

Figure 1 Installation dimension diagram (unit: mm)

It is recommended to use side installation, better heat dissipation effect, when the design and installation size, pay attention to the terminal size and wiring!

4. Strengthen heat dissipation

1)The reliable operating temperature of the drive is usually within 50℃ and the motor is within 80℃;

2)It is recommended to choose the automatic half-flow mode, that is, when the motor stops, the current automatically reduces by half, to reduce the heat of the motor and the drive;

3)When installing the drive, use the side installation and form strong air convection on the drive bottom; if necessary, install the fan near the drive to form air convection, auxiliary drive heat dissipation, and ensure that the drive works within a reliable operating temperature range.


Previous: 
Next: